We often get asked who owns the company and where do the wetsuits get made?

The short answer is that we are an Australian owned company and the goods are made in Taiwan.

When we started in 2005 the best neoprene was made in Japan and the textiles in Italy.

The textiles were attached to the neoprene in Japan, so we utilised finishing factories in Japan.

But then we were told by the neoprene manufacturer that we had to use finishing factories in China.

Unfortunately, the quality of the finished product

ToasTees Wetsuits are designed to be almost as light as a Rash vest but keep you warm like a regular 2mm wetsuit.

In general, most wetsuits are made from one of 3 grades of Neoprene. They are categorised according to their cell density and are either 100% SBR, 50 %SBR / CR or 100% CR. With SBR being the  highest quality.

All ToasTees Wetsuits are made from 0.5mm thick Neoskin TM ( 100 % SBR high density closed cell neoprene coated with a titanium backing.).

The seams are flat lock stitched to reduce chafing

The Children's Range is made from 0.5mm thick Neoskin TM ( 100 % SBR Neoprene coated with a titanium backing).

The combination of closed cell neoprene and Titanium backing increases the warmth by up to 30% compared to other wetsuits. The 0.5 mm Neoskin achieves similar thermal benefits compared to those of regular thicker and bulkier 2mm wetsuits.

Using 0.5mm Neoskin makes the wetsuits thin and lightweight with minimum buoyancy. The 4 way super stretch nylon coating achieves the best combination of flexibility

The Adult Ocean Series  is light, tough, very stretchy and flexible. It is best for Ocean swimming, Surfing, kayaking etc 

The Adult Ocean Series range is made from 0.5mm thick Neoskin TM
( 100 % SBR Neoprene coated with a titanium backing).

The combination of closed cell neoprene and Titanium backing increases the warmth by up to 30% compared to other wetsuits. The 0.5 mm Neoskin achieves similar thermal benefits compared to those of regular thicker and bulkier 2mm wetsuits.

Using 0.5mm Neoskin makes

The Adult INSTRUCTOR series CHLORINE RESISTANT WETSUIT range is made from our 0.5mm thick Neoskin TM ( 100 % SBR Neoprene).

The neoprene is then coated on both sides with Chloroban ( PBT/Polyester ) and flat locked stitched with a Poly/Poly thread. It is best for instructors who spend time in heavily chlorinated pools.

The combination of closed cell neoprene and Titanium backing increases the warmth by up to 30% compared to other wetsuits. The 0.5 mm Neoskin achieves similar thermal benefits compared

Our Wetsuit tops have made it into an Ad.

Back to front and way too big for the kids.

But still , they were used to keep kids warm  in an advertisement shot in the middle of winter none the less !

Please remember that the neoprene is only 0.5mm thick.

Following the care instructions below will greatly increase the life of your ToasTee.

• Rinse in cold water after use.
• Drip dry out of direct sunlight.
• Do not dry inside out.
• Do not Peg.
• Do not machine wash.
• Do not tumble dry.
• Don't leave to dry in a humid chlorine pool enviroment.

It is hard to measure children with tape measures.

As a rule of thumb. Order the same size wetsuit as the Age size T-shirt ( AUS or UK ) that they are wearing now. The T shirt may fit loose but the same size wetsuit should fit snug.

Let's explain how to obtain the correct measurements for our products.

For children.

The most important measurement is the chest. Take a tape measure and measure around the chest at nipple height.

The next important measurement is the body length. Measure from the lower

Children’s Squad Suits

Information and sizing for the Children’s Squad suit.

They were designed for children who were no longer doing Learn to Swim and had progressed to Learning competitive strokes / Mini squads.

They are made from the same materials as our kid’s tops and designed to get the kids through these squads 2 sessions a week for terms 2 and 3.

So we made them in sizes 8, 10 and 12. For children approximately 7 to 14 years.

Before 7 years old they will be in our tops ( Kid’s wetsuits ) or Spring

TERMS

TERMS OF USE AGREEMENT 



The use of this site is governed by the policies, terms and conditions set out below . Please read them carefully. Your use of this site indicates your acceptance of these terms and conditions. Your placement of an order indicates your acceptance of these terms and conditions. Your submittal of any purchase order to ToasTees Wetsuits indicates acceptance of these terms and conditions. These terms and conditions shall supercede any subsequent terms or conditions included with any purchase

RETURNS INFORMATION

Here at Toastees We pride ourselves on our quality products and excellent customer service. We understand that we all make mistakes and work to ensure our customers are happy and get the correct wetsuit! 

Dispatching your order

Once your order has been received and paid for, it will be sent the next business day.

We use Australia Post and Couriers, depending on where the product is going.

When purchasing more than one child’s garment or an adult garment, please remember that the parcel will be bulky

Why we don't do Long sleeve for kids under 6.

Sorry but we don't do long sleeve tops for children under 6 years.

There are 2 main reasons we don't do it.

1. You need a descent  seal at the cuff (or at least the forearm ) to stop water flushing in.

The cuff diameter  then needs to be 1-2cm smaller than the diameter of the child's wrist.

If you look across the width of your hand , even with your thumb tucked in you will see that it is much wider than your wrist.

Therefore with the cuff a smaller diameter than the

Warranty and Expected Duration / Usage and Length of time of our Garments.

Our products are guaranteed for 30 days for manufacturers’ defects such as Zips, Seams, Neoprene blemishes etc.

However, as we have no way of policing how our products are used / taken care of or the chlorination levels of pools that they are used in,  we do not offer a warranty on wear and tear caused by the purchaser or caused by chlorine degradation.

In Pools with standard chlorination levels of 1.0 mg/L for an outdoor public swimming